鋼結構材料是一種綠色環保的材料，現在很多人在搭建廠房、隔層或者搭建樓梯的時候都會選擇鋼結構材料，那么大家知道復式樓房鋼結構隔層的制作方法以及注意事項嗎?下面濟南輕型鋼結構廠家為您解說。

Steel structure material is a kind of green and environment-friendly material. Now many people choose steel structure material when building plants, partitions or stairs. Do you know the manufacturing method and precautions of steel structure partitions in duplex buildings? Next, Jinan light steel structure manufacturer will explain.

1、在承重墻上打幾對洞，要求穿進鋼管或剛梁。以它們作躍層的承重件，其他部分就好辦了;缺點是承重墻的洞，能打不能打，可能會受別人的限制。

1. Several pairs of holes shall be drilled on the bearing wall, which shall be threaded into steel pipes or rigid beams. They can be used as load-bearing parts of the thermocline, and other parts can be easily handled; The disadvantage is that the holes in the load-bearing wall can be opened or not, which may be limited by others.

2、在下層重新建立一些承重柱，在這些柱上建躍層;這個作法避免了1的缺點，但也有缺點：澆注工程復雜麻煩，預構件則要整尺寸的，搬運進屋是個困難，而且底層也有面積上的額外損失。如果1的缺點無法克服，那么就只能這樣。

2. Re establish some bearing columns in the lower layer, and build thermocline on these columns; This method avoids the disadvantages of No. 1, but it also has disadvantages: the pouring project is complex and troublesome, the prefabricated members need to be full sized, it is difficult to carry them into the house, and the ground floor also has additional loss in area. If the shortcomings of 1 cannot be overcome, this is the only way.

隔層

interlayer

3、一般情況下，用槽鋼就行了，但用工字鋼的抗彎強度會更高，當然造價也會更高，鋼木結構搭建的優點是速度快，即搭即用，不需要等待。缺點是槽鋼做的閣樓當人在上面走動時，會有一定的晃動聲，槽鋼規格越小，晃動聲越大。

3. In general, it is OK to use channel steel, but the bending strength of I-steel will be higher, of course, the cost will also be higher. The advantage of steel wood structure construction is that it is fast, ready to use, without waiting. The disadvantage is that when people walk on the loft made of channel steel, there will be a certain shaking noise. The smaller the specification of channel steel, the greater the shaking noise.

采用槽鋼的做法屬于推薦做法。根據我們多年的施工經驗，總結出了有關鋼木結構的工藝及做法，配合實景照片，現上傳供大家參考，希望對挑高層的業主有所幫助。挑高房高度2300MM左右的位置一般都會有一道圈梁，這是專為做鋼結構預留的，做鋼結構時，主鋼一定插入此梁體中。

Channel steel is recommended. Based on our years of construction experience, we have summarized the technology and practice of steel and wood structures. With the help of live photos, we are uploading them for your reference, hoping to be helpful to the owners of high-rise buildings. Generally, there is a ring beam at the height of 2300mm or so of the cantilevered room, which is reserved for steel structure. When making steel structure, the main steel must be inserted into this beam.

4、現在做隔層我們一般使用10號工字鋼，10號的鋼我們一般稱之為主鋼，主鋼與主鋼之間(靠墻體部分)需用8號槽鋼聯接加固。

4. Now we generally use No. 10 I-steel for the partition. No. 10 steel is generally called the main steel, and between the main steel and the main steel (the part near the wall), 8 # channel steel is required for connection and reinforcement.

此外面積小的房子，我們一定要注意層高，一般的小復式房，它的層高應該在5米以上，如果房子的層高小于5米，分成上下兩層之后，會讓人感覺空間非常的狹窄壓抑。

In addition, for a small house, we must pay attention to the floor height. For a general small duplex house, its floor height should be more than 5 meters. If the floor height of the house is less than 5 meters, and it is divided into upper and lower floors, people will feel that the space is very narrow and oppressive.

在復式房子中，樓梯是不可缺少的。盡量在樓梯的兩側安裝扶手，這樣可以保證樓梯的性能和穩定性，以免家中有老人和孩子上下樓梯時發生意外。

In a duplex house, stairs are indispensable. Try to install handrails on both sides of the stairs to ensure the performance and stability of the stairs, so as to avoid accidents when old people and children go up and down the stairs at home.

上述內容是廠家為大家介紹的鋼結構隔層的注意事項，相信大家看完之后會對此有進一步的認識和了解，如若您想要了解更多的內容，可以多多關注我們的網站http://1myl.com。

The above contents are the precautions for steel structure interlayer introduced by the manufacturer. I believe you will have a further understanding and understanding after reading it. If you want to know more, you can pay more attention to our website http://1myl.com 。